Installation and assembly instructions
Placement of the ground heat exchanger and the dog house
For the placement of the ground heat exchanger and the dog house, select the area according to the specifications described in the table found in the installation guide. The ground heat exchanger will be located beneath this area, with the assembled dog house placed above it. Consideration must also be given to the temporary placement of the excavated soil, which requires additional space. If the site conditions are suitable, the preparatory work can be carried out in accordance with the installation guide.
The recommended orientation of the dog house door is north or northeast, as it is very important that the door is not exposed to direct sunlight. This helps prevent excessive overheating of the interior during summer. If this orientation is not possible, the door must be provided with external shading.
Whenever possible, avoid rocky, debris-filled, or groundwater-affected areas, as these significantly complicate installation work and expose the ground heat exchanger to an increased risk of damage. Installation in low-lying areas should also be avoided, as heavy rainfall may cause water to flow into the ground heat exchanger.
The solar panel must be installed on the south–southwest-facing roof of the dog house.
Installation of the ground heat exchanger
The ground heat exchanger must be installed in the ground in accordance with the instructions described in the installation guide. The trench required for this must be constructed in line with local soil conditions, applicable regulations, and occupational safety requirements. Special attention must be paid to ensuring that soft soil or sand surrounds the pipe. Damage to the pipe must be strictly avoided, as any water entering it may block the airflow.
For the installation of the ground heat exchanger, it may be advisable to seek the assistance of a building services professional.
For further information or assistance, please contact us using the details below:
Email: flinkproduct@gmail.com
Phone: +36/20-269-2370
Assembling the dog house
The structural components of the dog house are pre-manufactured and delivered in a flat-pack format, allowing anyone to assemble it quickly and easily using a cordless screwdriver, following the assembly instructions included in the box.
Attention! When positioning the dog house, it is important to ensure that the door is not exposed to direct sunlight, as this is the only way to prevent excessive overheating of the interior during summer. Recommended orientation: the door of the dog house should face north or northeast. If installation in this orientation is not possible, the door must be provided with external shading.
The solar panel must be installed on the south–southwest-facing roof of the dog house.
When designing the product, our goal was to create a dog house with unique features that is able to provide a comfortable space for dogs using only renewable geothermal energy, in a self-sustaining and fully autonomous way. During the design process, key considerations included sustainability, simplicity, and creating a durable, long-lasting construction.